Melco Advantage 18, Руководство по эксплуатации

Страница: 42 / 98

When to Use The Move Menu
The Move Menu allows precise placement of a design by repositioning the embroidery area under
the needle.
In Figure 4-1, the machine has already embroidered a three-letter monogram on the forward, left
side of the embroidery field.
The dashed lines show the center of the embroidery field. The box with three small plus signs (+) in
the rear, right shows the next position of the design.
1. After the first design finishes embroidering, the LCD displays: END OF DESIGN.
2. Press [MENU] to scroll to the Move Menu. The LCD displays: MOVE MENU.
3. Press [ENTER] and the LCD displays: MOVE X +00.00 IN.
4. If necessary, press [
⇒
] to make the value positive.
5. Press and hold the [
⇑
] key and the value increases rapidly. Stop at +2.00. The display now reads:
MOVE X +02.00 IN.
NOTE: Keep in mind that the X movement of the carriage is in reference to the needle position.
That means, for the needle position to move to the right in the embroidery field, the
carriage must move to the left.
6. Press [ENTER] and the LCD displays: MOVE Y +00.00 IN.
7. If necessary, press [
⇒
] to make the value positive.
8. Press and hold [
⇑
] until the value r2.50. The display now reads: MOVE Y +02.50 IN.
Figure 4-1
4 - 6 Move Menu
Advantage 18 Operation Manual Melco Embroidery Systems