4. Lift the pretensioner magnet. Position the thread in the groove, over the idler roller, and through
the guide hole as shown in Figures 2-2 and 2-3.
5. Repeat steps 1 through 4 for all the thread positions.
6. Replace the pretensioner.
7. Trim the ends of the thread to 1/8 inch in front of the carriage (see Figure 2-3).
Pretensioner Magnet
(lifted for thread placement)
Thread tubes
from the
thread tree
Idler Roller
Guide Hole
Groove
Figure 2-2
Pretensioner Magnet
(in operating position)
Threads trimmed
to 1/8 inch.
Figure 2-3
2 - 2
Threading the Advantage 18
Advantage 18 Operation Manual
Melco Embroidery Systems
Содержание Advantage 18
