McLane Research Laboratories Mark 78H-21, Руководство пользователя

Страница: 111 / 168

Appendix B-7
Deployment Menu – Sampling Interval
The sampling interval for logging pressure and/or temperature data is set to the default of 1
minute. This default can be changed on the Deployment Menu (Figure B-8).
Figure B-8: Change Sample Interval
Diagnostics
Selecting <2> ‘Diagnostics’ displays a scrolling status that includes the pressure reading in dbars.
The external temperature displays in degrees Celsius, if being recorded.
Figure B-9: Diagnostics with RBR Sensor Installed
Selection [] ? 2
Hold down ^C to exit. Any other key to pause/continue.
Date Time Battery Int. Temp Ext. Temp Tilt Heading Pressure Rotator
08/12/15 13:33:07 21.1 Vb 24.1 ∞ C 22.6 ∞ C 15.9 ∞ T 245.7 ∞ H -0.0 dbar aligned
08/12/15 13:33:12 21.1 Vb 24.1 ∞ C 22.6 ∞ C 16.1 ∞ T 243.9 ∞ H 0.1 dbar aligned
08/12/15 13:33:17 21.1 Vb 24.2 ∞ C 22.6 ∞ C 16.3 ∞ T 243.7 ∞ H -0.0 dbar aligned
08/12/15 13:33:21 21.1 Vb 24.2 ∞ C 99.0 ∞ C 16.1 ∞ T 244.1 ∞ H 99.0 dbar aligned
Modify an event [N] ?
Header A|
B|
C|
D| Sensor sampling interval [minutes]: 1
V| Verify and proceed.
Selection [ ] ? a
> S/N 13433-02
Header A| S/N 12345-02
B|
C|
D| Sensor sampling interval [minutes]: 1
V| Verify and proceed.
Selection [A] ?