McLane Research Laboratories Mark 78H-21, Руководство пользователя

Страница: 102 / 168

A-2
Setting Up the Wet Sample Divider
To prevent damage, the Wet Sample Divider is shipped with the sample tray uninstalled. To
install the tray, complete the following steps:
1. Wash the sample tray and rotary head with neutral water.
2. Plug the Wet Sample Divider into an AC power outlet.
3. Turn the Tower switch ‘On’ and Press the ‘Up’ button (the Tower must be all the
way up before the sample tray can be installed).
4. Slide the sample tray into the grooved notch at the top of the Tower.
Figure A-3: Installing Sample Tray into Groove
5. Slide the front of the tray down over the Rotary Splitter Head.
Groove