McIntosh MX134, Руководство пользователя

Страница: 26 / 60

26
Figure 7
ADJUSTMENTS HAVE BEEN MADE
DO YOU WANT TO SAVE THEM?
NO
YES
Loudspeaker Default Setting New Setting
Front (L&R) Small{THX}
Center Small{THX}
Surround (L&R) Small{THX}
Back Surround Small 2{THX}
Subwoofer Yes
Sub Crossover 80Hz {THX}
Mc Bass Off
Loudspeaker Size
How to Adjust for Loudspeaker Size, con’t
7. Next perform the MC Bass Mode adjustment below or
if no adjustment is needed, then continue to the
SPEAKER TIME DELAY Settings. If you do not wish
to perform SPEAKER TIME DELAY adjustments at
this time, select MAIN MENU from the menu. The
MAIN SYSTEM SETUP Menu will reappear on the
Monitor/TV screen and proceed to the next step.
8. Select EXIT from the MAIN SYSTEM SETUP Menu.
If you are satisfied with the changes that you may have
made, select YES to save those changes or NO not to
save them. The MX134 will then return to normal op-
eration. Refer to figure 7.
Mc Bass Mode
When a Home Theater System contains Loudspeakers that
are refered to as Large, the Bass Management Circuitry
will direct all the Low Frequency Sounds away from the
Subwoofer and to the Large Loudspeakers. With the MC
BASS MODE set to ON the Low Frequency Sounds are
sent to both the Large Loudspeakers and to the
Subwoofer, thus increasing the total low frequency out-
put of the Home Theater System. The default setting for
the MC BASS MODE is OFF. Refer to figure 8 and per-
form the following steps to switch it On.
Note: The MC BASS Mode is only active when the Source is
either a Two Channel Analog or Digital Signal.
9. Using the Up or Down directional push-buttons,
select MC BASS MODE from the Speaker Size On-
Screen Menu, followed by pressing the Left
or
Figure 8
MENU: SPEAKER SIZE
FRONT: Small{THX}
CENTER: Small{THX}
SURROUND: Small{THX}
BACK SURROUND: Small2{THX}
SUBWOOFER: Yes
SUB Crossover: 80Hz{THX}
MC BASS MODE OFF
MAIN MENU
Right directional push-buttons to activate the circuit.
Select MAIN MENU and the MAIN SYSTEM SETUP
Menu will reappear on the Monitor/TV screen.
10. Next continue to the SPEAKER TIME DELAY Set-
tings. If you do not wish to perform SPEAKER TIME
DELAY adjustments at this time, select MAIN MENU
from the menu. The MAIN SYSTEM SETUP Menu
will reappear on the Monitor/TV screen and proceed to
the next step.
11. Select EXIT from the MAIN SYSTEM SETUP Menu.
If you are satisfied with the changes that you may have
made, select YES to save those changes or NO not to
save them. The MX134 will then return to normal op-
eration. Refer to figure 7.