McIntosh MX134, Руководство пользователя

Страница: 37 / 60

37
SETUP, con’t
How to Change the Zone B Setup
The MX134 allows setting the wakeup Volume Level for
Zone B. The level is expressed in percentage of maximum
available volume.
1. Press and hold the Front Panel SETUP Push-button ap-
proximately three seconds to enter the Setup Mode.
The word SETUP will appear on the MX134 Front
Panel Display and the MAIN SYSTEM SETUP Menu
will appear on the Monitor/TV screen. Refer to figure
25 on page 36.
2. Using the Up or Down directional push-buttons on
the Remote Control, select Zone B Setup on the On-
Screen Menu, followed by the SELECT Push-button.
Refer to figure 27.
3. Using the Up or Down directional push-buttons,
select VOLUME from the On-Screen Menu, followed
by pressing the Left
or Right directional push-but-
tons to select the desired Volume Level.
4. Continue next to the ADVANCED Settings. If you do
not wish to perform ADVANCED Settings at this time,
select MAIN MENU from the menu. The MAIN SYS-
TEM SETUP Menu will reappear on the Monitor/TV
screen and proceed to the next step.
5. Select EXIT from the MAIN SYSTEM SETUP Menu.
If you are satisfied with the changes that you may have
made, select YES to save those changes or NO not to
save them. The MX134 will then return to normal op-
eration. Refer to figure 7 on page 23.
Figure 27
MENU: ZONE B SETUP
VOLUME: 20%
MAIN MENU