McIntosh MX134, Руководство пользователя

Страница: 47 / 60

47
Music 1
This processing mode creates an effect similar to listening
in a large room or an outdoor area.
The Left and Right Stereo signals
are combined and sent to the Left
and Right Surround Loudspeakers
with a long time delay. The com-
bined Left and Right signals are
also sent to the Center Loudspeaker.
The Front Panel Alphanumeric Dis-
play will indicate MUSIC 1. The Output Format LEDs L,
C, R, LS, RS and SUB will illuminate. Refer to figures 61
and figure 62.
Cinema
This provides decoding of Dolby Pro Logic II channel
Analog or Digital signals and de-
coding of Dolby Digital signals or
DTS signals. The Front Panel Al-
phanumeric Display will indicate
CINEMA. The Output Format
LEDs L, C, R, LS, RS and SUB will
illuminate. Refer to figures 63 and
64.
THX Cinema
THX signal processing is active in this mode, and is best
for reproducing a film sound track
that was originally created for use in
a movie theater. THX Adaptive
Decorrelation, Re-EQ Filtering and
Timbre Match are added to the Pro
Logic, Dolby Digital and DTS De-
coded Signals. The Front Panel Al-
phanumeric Display will indicate
THX CINEMA. The Output Format LEDs L, C, R, LS, RS
and SUB will illuminate. Refer to figures 65 and 66.
Note: If the Back Channel Surround Mode is set to On or
Auto in the MX134 Surround Mode Setup the BS Output
Format LED may also illuminate.
External
All internal signal processing is bypassed and the eight
Rear Panel EXTERNAL INPUTS
are activated so the MX134 per-
forms as an Eight Channel Pream-
plifier for an external source or pro-
cessor. The Front Panel Alphanu-
meric Display indicates EXTER-
NAL and the OUTPUT FORMAT
LEDs L, C, R, LS, RS, BS and SUB
will illuminate. Refer to figures 67 and 68.
Note: Approximately 3 seconds after selecting EXTERNAL
SURROUND MODE, the Front Panel Alphanumeric
Display will change indicating EXTERNAL to the
normal display of INPUT A, INPUT B and percentage
of VOLUME.
Mono
All Mono Signals are sent only to the CENTER Loud-
speaker and the Front Panel Alpha-
numeric Display will indicate
MONO. All Multi-channel Signal
Sources are combined to a single
channel for Mono. The OUTPUT
FORMAT LEDs C and SUB will
illuminate. Refer to figures 69 and
70.
Note: If the Subwoofer was turned OFF in the SPEAKER
SIZE setup, the OUTPUT FORMAT SUB LED will not
illuminate.
How to Operate the MX134, con’t
Figure 62
Figure 64
Figure 66
Figure 70
Figure 68
Figure 61
Figure 63
Figure 65
Figure 67
Figure 69