McIntosh MX134, Руководство пользователя

Страница: 29 / 60

29
L o c a ti o n D e fa u l t S e tti n g N e w S e tti n g
L e f t F ron t 0d B
C e n te r 0d B
R ig h t F ro n t 0d B
R ig h t S u rrou n d 0d B
R ig h t B a c k S urr oun d 0d B
L e f t B a c k S urro un d 0d B
L e f t S urr oun d 0d B
S ubw oof e r 0d B
L o u d s p e a k e r L e v e ls
Figure 13
SETUP, con’t
MENU: SPEAKER LEVEL
AUTOMATIC {OFF}
MANUAL {ON}
LEFT FRONT 0
CENTER 0
RIGHT FRONT 0
RIGHT SURROUND 0
RIGHT BACK SURR 0
LEFT BACK SURR 0
LEFT SURROUND 0
SUBWOOFER 0
MAIN MENU
a level is changed, the on-screen display instantly indi-
cates the level change.
Note: If the level is increased or decreased, the display will
indicate numbers or minus numbers.
7. As the test signal switches to succeeding Loudspeak-
ers, repeat the level adjustment process until the test
signal volume levels of all the Loudspeakers are the
same. The Loudspeaker level cycling mode can be re-
peated as often as necessary.
8. Press the SELECT Push-button to switch Off the Auto-
matic Loudspeaker Level Switching Mode.
9. Continue next to the INPUT SETUP. If you do not wish
to perform INPUT SETUP Adjustments at this time,
select MAIN MENU from the menu. The MAIN SYS-
TEM SETUP Menu will reappear on the Monitor/TV
screen and proceed to the next step.
10. Select EXIT from the MAIN SYSTEM SETUP Menu.
If you are satisfied with the changes that you may have
made, select YES to save those changes or NO not to
save them. The MX134 will then return to normal op-
eration. Refer to figure 7 on page 23.
Manual Speaker Level Switching
11. Using the Up or Down directional push-buttons,
select MANUAL from the Speaker Level On-Screen
Menu, followed by pressing the SELECT Push-buttons
to activate the Manual Loudspeaker Switching Mode.
Refer to figure 13.
12. Adjust the volume of the test signal by pressing the
Left or Right directional push-buttons on the Re-
mote Control.
Note: The Left Front Loudspeaker Volume Level can serve
as a reference. If the level is increased or decreased,
the display will indicate numbers or minus numbers.
13. Using the Up or Down directional push-buttons,
select the next Loudspeaker and perform the level ad-
justing procedure. Continue this for each of the remain-
ing Loudspeakers. Repeat this as often as necessary un-
til you are satisfied that the volume levels of all the
Loudspeakers are the same.
14. Press the SELECT Push-button to switch Off the
Manual Loudspeaker Level Switching Mode.
15. Continue next to the INPUT SETUP. If you do not
wish to perform INPUT SETUP Adjustments at this
time, select MAIN MENU from the menu. The MAIN
SYSTEM SETUP Menu will reappear on the Monitor/
TV screen and proceed to the next step.
16. Select EXIT from the MAIN SYSTEM SETUP Menu.
If you are satisfied with the changes that you may have
made, select YES to save those changes or NO not
to save them. The MX134 will then return to nor-
mal operation. Refer to figure 7 on page 23.