McIntosh MX134, Руководство пользователя

Страница: 22 / 60

22
How to Operate the Setup Mode
Your McIntosh MX134 has been factory configured for de-
fault operating settings that will allow immediate en-
joyment of superb video and high fidelity audio without the
need for further adjustments.
If you wish to make changes to the factory default set-
tings (refer to the adjacent page), a System Setup Feature is
provided to customize the operating settings using On
Screen Menus.
Notes:
1. To use the On Screen Menu feature, the MX134 MON A
Video OUTPUT or COMPONENT Video OUTPUTS
must be connected to the video input of a Monitor/TV.
2. Any adjustments made to the SPEAKER settings must be
performed in the correct sequence, since they are
interactive.
3. Follow the sequence listed in the MAIN SYSTEM
SETUP MENU for these adjustments.
1. Press the POWER switch to ON, the Red LED above
the STANDBY/ON Push-button lights to indicate the
MX134 is in Standby mode. To Turn On the MX134
press the STANDBY/ON Push-button. The title MUTE
will appear on the Front Panel Alphanumeric Display
for approximately two seconds after turn on, with the
Output Muted. Refer to figures 1, 2 & 3.
Notes: For normal operation, turn the MX134 On and Off
with the Standby/On Push button. You may also turn
on the MX134 by simply pressing the Power Push
button on the Remote Control. If the A/V System
Controller is not going to be used for an extended
period of time, turn off all AC Power with the Power
Switch. When the MX134 Main POWER Switch is
first switched ON, the Front Panel Alphanumeric
Display will indicate MX 134 and the Front Panel
Nomenclature will illuminate for about two seconds,
if the internal microprocessors are functioning
properly. The MX134 will then go into the Standby
Mode, waiting to be switched On.
2. Press and hold the MX134 Front Panel SETUP Push-
button approximately
three seconds to enter the
Setup Mode. The word
SETUP will appear on
the Front Panel Alphanu-
meric Display and the
MAIN SYSTEM SETUP
Menu will appear on the
Monitor/TV Screen. Re-
fer to figures 4, 5 & 6.
3. Access the desired Setup
Menu by pressing the
Up
or Down direc-
tional push-buttons fol-
lowed by the SELECT
Push-button on the sup-
plied Remote Control.
The desired Setup Menu
will then appear on the
Monitor/TV Screen. Use
the Up
or Down di-
rectional push-buttons to
select the menu item and
press the Left
or
Right directional push-
buttons to change the
current setting. Refer to
figure 3.
4. After all adjustments are
complete, select EXIT by
pressing the Up
or
Down directional
push-buttons on the re-
mote control. Return to
the MAIN SYS-
TEM SETUP Menu
by pressing the SE-
LECT Push-button.
5. Exit the MAIN
SYSTEM SETUP
Menu by pressing
the Up
or
Down directional
push-buttons followed by the SELECT Push-button.
Figure 1
Figure 4
Figure 2
Figure 5
Figure 3