McIntosh MX134, Руководство пользователя

Страница: 21 / 60

21
How to Operate by Remote Control
How to Operate by Remote Control
The supplied Remote Control is capable of directly control-
ling the functions of contemporary McIntosh Source Com-
ponents connected to the MX134. Earlier McIntosh source
components and other brand source components can be
controlled by the MX134 with the addition of a McIntosh
Remote Control Translator (RCT) and/or optional UR12
Touch Screen Remote Control.
Note: Your McIntosh Dealer can assist you with the
installation and operation of the Remote Control
Translator (RCT).
Mute
Press the MUTE Push-button to mute audio in the Zone
where the command is issued. The VCR OUTPUTS are not
affected by the MUTE function. The MX134 Front Panel
Alphanumeric Display will indicate the word Mute for
Zone A. Press MUTE a second time to unmute audio.
Mode
Press the MODE Push-button to select the Surround Mode
from Mono to THX Cinema plus External Mode for listen-
ing to an Eight Channel Analog Audio Source.
Trim
Press the TRIM Push-button, followed by the LEVEL
Up
or Down Push-button to select various sound ad-
justments and MX134 Setup Settings.
Input Source Selection
Press any of the twelve Input Push-buttons to select a pro-
gram source, both audio and video.
Disc and Tape Functions
Use these push-buttons to operate a DVD Player, CD
Player, CD Changer or Tape Recorder.
Numbered Push-buttons
Press Push-buttons 0 through 9 to access tuner station pre-
sets or CD tracks/discs.
Disc and Track
Use the DISC and TRACK Push-buttons when a CD
Player or changer is being used.
Tuner Push-buttons
Press the AM or FM Push-button to select the desired
broadcast band. Press and release the Channel Up
or
Down Push-button to move from station to station. Press
and hold a Channel Up or Down Push-button to move
continuously from station to station. Press REVIEW to
start the automatic brief audition of each of the presets
stored in the tuner memory. Press REVIEW a second time
to stop on a station preset and exit the Review process.
Note: The above Tuner Function requires either the optional
TM1 Tuner Module installed in the MX134 or an
external McIntosh Tuner connected to the MX134.
Volume
Press the Up or Down VOLUME Push-button to raise
or lower the listening volume level.
Note: The VCR OUPUTS are not affected by volume changes.
Acc On
Press ACC ON to turn the power ON to a McIntosh Disc
Player.
Acc Off
Press ACC OFF to turn the power OFF to a McIntosh Disc
Player.
E
Press E to perform various functions on a variety of McIn-
tosh Components. It will also pause the playing of a disc or
tape player.
Lighting
Press and release the LIGHTING Push-button to momen-
tarily illuminate the upper half of the Remote Control
Push-buttons.
Note: While the LIGHTING Push button is being depressed,
the Remote Control will be unable to send a remote
command. When the LIGHTING Push button is released
the push buttons will continue to stay illuminated for
approximately three seconds thus allowing you to send
the desired command. If any of the translucent push
buttons are depressed, they will continue to stay
illuminated for approximately three seconds.
Optional Remote Control
The McIntosh UR12 Touch Screen Re-
mote Control combines a Multi-Page LCD
Touchscreen, joystick navigation and easy
to use command macros for operating all
the components in your system. See your
McIntosh Dealer for additional informa-
tion.