McIntosh MX134, Руководство пользователя

Страница: 48 / 60

48
How to Operate Zone B
The MX134 includes the feature of being able to operate
and control two Audio/Video Zones, independent of each
other. Zone A is designed to be the Primary (Home Theater
Listening Area) with Surround Sound capability. Zone B is
configured for a Secondary Remote Location providing
two channel audio and video programs.
The program source selected for Zone A appears on the
right side of the MX134 Front Panel Alphanumeric Dis-
play, and the program source selected for Zone B appears
on the left side. Zone A Sources are selected by using the
INPUT A (Listen) Selector Switch and the Zone B Sources
are selected by using the INPUT B (Record) Selector
Switch. Refer to figure 72.
1. Zone B may be switched On or Off by pressing the
POWER Push-button on the Keypad or using a Remote
Control aimed at a Sensor located in Zone B. When
Zone B is switched On the MX134 Front Panel Dis-
play will indicate ZONE B ON if Zone A is not active.
Refer to figures 73, 74 and 75.
Note: Zones A and B may be Turned Off by pressing the SYS
Push button on the Front Panel, Keypad or using the
Remote Control. Refer to figures 71, 73 and 74.
Source selection may also be accomplished from the
MX134 Front Panel INPUT B (Record) Selector.
The separate INPUT B (Record) and INPUT A (Listen)
Switches allow for the making of a recording from one pro-
gram source while listening to another. You can also listen
(monitor) to the recorded signal off the tape, a fraction of a
second later, during recording when a three head tape re-
corder is used. Refer to figure 71.
1. Select the desired program source to record with the
front panel INPUT B RECORD selector switch.
2. Press the REC LOCK (Record Lock) Push-button to
disable any Zone B sensors or Keypads to avoid a
Zone B selection interfering with the recording pro-
cess.
Note: If there is no Zone B connected in your system this
step can be omitted.
3. Adjust the record level using the tape recorder volume
control.
4. To monitor the tape during recording with a three head
tape recorder, or playback the tape just recorded, turn
the INPUT A LISTEN switch to select the recorder
used to make the tape.
Note: The MX134 RECORD OUTPUTS are not affected by
the VOLUME control. To listen to a different program
source while recording, turn the LISTEN switch to the
desired source. The recording process will not be
affected and will continue.
How To Make A Tape Recording
Figure 71
Figure 73
Figure 72