1.02
Purpose of Document
This manual contains the technical characteristics, the performance, the transportation and installation
rules, the instructions for use, and the preventive and corrective maintenance operations of the machine
manufactured by
Ing. ENEA MATTEI
S.p.A.
NOTE : This manual should be considered an integral part of the machine, and should
stay with it during the entire life span of the equipment.
Keep this manual and all of the attached documents in a place easily accessible to all staff
in charge of the control or the maintenance of the machine.
Ing. ENEA MATTEI
S.p.A.
reserves the right to subject the supply of further copies to the
repayment of charges and the acceptance of special provisions with respect to the legiti-
mate defense of intellectual, patent, and executive identity and functional property of the
product and/or its parts.
It is understood that forwarding all or part of this manual to third parties is not tolerated
unless with the prior written consent of Ing. ENEA MATTEI
S.p.A.
for both the text, the
illustrations and the diagrams attached.
Ing. ENEA MATTEI
S.p.A.
reserves the right to make changes without prior notice. Any
change, supplement or suppression of elements, components, functions or cycles of the
machine, not previously agreed upon with Ing. ENEA MATTEI
S.p.A.
releases the manu-
facturer from any responsibility whatsoever.
☞
General Information
This manual is for the user and the service engineer of the machine, and it aims at supplying them with
the basic technical data typical of the system, a technical description of the several operating groups
that form it as well as the essential use procedures and the information necessary to perform preventive
and corrective maintenance.
This manual is for staff with a sound knowledge of the processing technique, of mechanical and electrical
diagrams, and is for both those in charge for the use of the machine and the service engineers.
This manual is an integral part of the machine and contains information that aims at granting all staff
safe working conditions and guaranteeing perfect efficiency during the life span of the machine.
For a correct use of the machine, it is assumed that the working environment is adequate to current
regulations concerning safety and hygiene.
Applied directives and technical standards
The machine has been designed, made, and inspected in compliance with the “safety and health es-
sential requirements” stated in attachment I to the
European Directive 98/37/EEC
.
The list below gives the reference Standards used by
Ing. ENEA MATTEI
S.p.A. to design, make, and
to make the final inspection of the machine.
List of Directives and Technical Harmonized Standards
MACHINERY DIRECTIVE 98/37/EEC
ELECTROMAGNETIC COMPATIBILITY (EMC) DIRECTIVE
2004/108/CE
LOW VOLTAGE DIRECTIVE 2006/95CE
EN 1012-1
Compressors and vacuum pumps – Safety Requirements - Compressors.
TI008G0001
