1.03
Required Qualifications for Operators
The operator in charge of the operation or the maintenance of the machine should have all the profes-
sional requirements specific to each foreseen operation.
The operator should be trained and aware of his responsibilities.
Below is the description of the professional profiles concerning the operators in charge of the machine
Entry Level Machine Operator
(Qualification 1)
Qualified staff able to carry out simple tasks, i.e. to operate the machine with the use of
controls on the push-button, and to carry out typical simple functions of adjustments, start
or stop.
Second Level Machine Operator
(Qualification 2)
Qualified staff able to carry out the task of qualification 1 and also to operate the machine with
disconnected safety protections to perform specific adjustments, start or stop functions.
☞
Important
This qualification includes those responsibilities typically subdivided into two separate qualifi-
cations. For the operator in charge of our machines, a specialization course is held to train the
operator to be able to perform all of the actions necessary to operate the machine even with some
of the protections disconnected. However, this requires a certain competence by the operator
and extreme care by the manager of the factory so that the said operator carries out only the
established operations.
Mechanical Service Engineer
A qualified engineer able to operate the machine under normal conditions, to operate it with
disconnected protections, to intervene on mechanical parts to carry out all adjustments,
carry out maintenance and all of the necessary repairs.
This person is not empowered to carry out interventions on electrical systems with live
voltage.
Electrical Service Engineer
A qualified engineer able to operate the machine under normal conditions, to operate it with
disconnected protections. He/she is in charge of all electrical adjustments, maintenance
and repair.
He/she is able to operate with live voltage inside cabins and shunt boxes.
The Manufacturer’s Engineer
A
qualified engineer from the manufacturer to perform complex operations in
special situations or according to that which has been agreed upon with the
user.
General Information
TI008G0001
099
100
101
102
103
104
