Doosan HP450WJD T3 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 130

Doosan HP450WJD T3 Скачать руководство пользователя страница 1

Doosan Infracore Portable Power
1293 Glenway Drive
Statesville, N.C. 28625
www.doosanportablepower.com

Book: 23252059 (08-2010) Rev B

This manual contains important safety information.

Do not destroy this manual.

This manual must be available to the personnel who operate and maintain this machine.

OPERATION, MAINTENANCE,

MANUAL

COMPRESSOR MODELS

P600WJD T3 (7/170) C54 (D18)
HP450WJD T3 (10/125) C55 (D19)
VHP400WJD T3 (14/115) C56 (D20)

Revised (

10

-12)

Doosan purchased Bobcat Company from Ingersoll-Rand Company in
2007. Any reference to Ingersoll-Rand Company or use of trademarks,
service marks, logos, or other proprietary identifying marks belonging
to Ingersoll-Rand Company in this manual is historical or nominative
in nature, and is not meant to suggest a current affiliation between
Ingersoll-Rand Company and

Doosan

Company

or the

products

of

either.

1
2
3
...
»

Содержание HP450WJD T3



































































































































Отзывы:

Нет отзывов