CONTENTS
viii
2-6 On the Occasion of Connection 2-14
2-6-1 Connecting Loads 2-14
2-6-2 Case of Connecting Load Accompanied by Excessive Ripple Current 2-15
2-6-3 Technical memo in case connecting power supply to a load with stored energy 2-16
2-6-4 How to Attach Protective Covers (750W to 3kW) 2-17
2-6-5 How to Attach Protective Covers (3.75kW to 15kW) 2-18
3.
Normal Operation 3-1
3-1 Description of Operation Modes 3-1
3-1-1 Constant Voltage Mode 3-1
3-1-2 Constant Current Mode 3-1
3-1-3 Crossover Mode 3-1
3-2 Status 3-2
3-3 Local Programming Mode Operation 3-2
3-3-1 Initial Setting 3-2
3-3-2 Setting Output Voltage/Output Current 3-2
3-3-3 OVP(Over Voltage Protection) Setting 3-3
3-4 Remote Sensing Operation 3-4
3-5 Switching between Local Mode and Remote Mode 3-5
3-5-1 Setting Current, Voltage and OVP(No.1) 3-5
3-5-2 Setting Current, Voltage and OVP(No.2) 3-6
3-6 Blackout Protection 3-7
3-7 Over Temperature Protection 3-8
4.
Advanced Operation 4-1
4-1 Series/Parallel Operation 4-1
4-1-1 Series Operation 4-1
4-1-2 Parallel Operation 4-1
4-2 Divided Operation 4-1
4-3 OVP Program Setting with External Voltage 4-2
4-4 Remote Switch ON/OFF 4-3
4-5 Remote Programming 4-5
4-5-1 Setting the Voltage Program with External Voltage 4-5
4-5-2 Setting the Voltage Program with External Resistance 4-5
4-5-3 Setting the Current Program with External Voltage 4-6
4-5-4 Setting the Current Program with External Resistance 4-6
4-6 Monitor/Status Output 4-6
4-6-1 Monitor Output 4-6
4-6-2 Status Output 4-7
“If you feel any fault” 5-1
