2 Installation and Operation
2-13
2-5-3 Contents of SW1
Be sure to read each referenced pages before you perform SW1 switching.
Referenced pages for each PIN are as follows;
PIN Number Page Referenced Referenced Item
1
4-5
4-5-2 Setting the Voltage Program with External Resistance
2
4-6
4-5-4 Setting the Current Program with External Resistance
3
4-5
4-5-1 Setting the Voltage Program with External Voltage
4
4-6
4-5-3 Setting the Current Program with External Voltage
5
4-6
4-6-1 Monitor Output
6
4-6
4-6-1 Monitor Output
7
3-8
3-7 Over Temperature Protection
8
3-7
3-6 Blackout Protection
１．
Do not switch PIN-3,-4,-5 and -6. The equipment might cause defect if you switch the pins.
２．
When you want to switch PIN-1 or -2, preform switching while stopping output.
(No problem happens by switching PIN-7,-8 while output)
CAUTION
NO
Caution
！
SW1
ON
1 2 3 4 5 6 7 8
OFF
PIN-5 Output voltage monitor output switching
PIN-6 Output current monitor output switching
PIN-7 Over temperature protecting function switching
PIN-8 Blackout protecting function switching
Current mode program input switching
PIN-4
Voltage mode program input switching
PIN-3
Current mode remote programming switching PIN-2
Voltage mode remote programming switching PIN-1
