Matsusada RE Series, Инструкция по эксплуатации

Страница: 11 / 43

2 Installation and Operation
2-3
2-3-4 Input Voltage/Current
<750W to 1.2kW type>
・When inputting 100V/110V/115V/120V AC, input change short bar SHORT.
・When inputting 200V/220V/230V/240V AC, input change short bar OPEN.
・Do not touch input change short bar, because high Voltage is being generated on it.
MODEL
INPUT
VOLTAGE
phase
INPUT CURRENT
±10％
AC50/60Hz
Normal type
(Typ)
PFC type
(Typ)
OUTPUT
VOLTAGE
750W to 765W
115V
1φ
12A
――
230V 8A
1.1kW to 1.2kW
115V
1φ
19A
――
230V 11A
1.8kW to 2.1kW 220V
1φ 17A ――
3φ 10A ――
2.9kw to 3kW 220V
1φ 25A ――
3φ 14A ――
3.75kW to 4kW 220V 3φ 19A 15A
4.5kW to 5.1kW 220V 3φ 23A 16A
7.35kW 10V, 15V 220V 3φ 35A 25A
to 20V to 60V 220V 3φ 34A 25A
7.5kW Over 100V 220V 3φ 33A 25A
8kW 10V, 15V 220V 3φ 46A 36A
to 20V to 60V 220V 3φ 44A 34A
10.5kW Over 100V 220V 3φ 41A 32A
11.7kW to 12kw 220V 3φ 54A 40A
15kw 220V 3φ 68A 50A
-L(200V) 115V of above INPUT VOLTAGE / CURRENT table become 100V,and 230V become 200V.
Input current is about 115% of Input current.220V(3φ) become 200V. Input current is about
110% of Input current.
-L(220V) 115V of above INPUT VOLTAGE / CURRENT table become 110V,and 230V become 220V.
Input current is about 105% of Input current.
-L(240V) 115V of above INPUT VOLTAGE / CURRENT table become 120V,and 230V become 240V.
Input current is about 95% of Input current. 220V(3φ) become 240V. Input current is about
90% of Input current.
※ 1）Other input voltage than AC115V or AC230V are optional.
2）Input current is the values at rated input voltage
3）Models other than standard article should follow the contents of each specification.
4）Single phase input corresponds only to 750W to 3kW.
！

MUST
・
Verify that rated input voltage is not decreased more than 10% of rated input voltage
(ex. 180VAC for 200VAC) at maximum rated voltage.
・Verify that input voltage is not decreased more than 10% of rated input voltage when
operating with all the devices connected.
・Check the input voltage indication on the rear panel of the unit and input the correct
voltage. Inputting wrong voltage may damage the device.
CAUTION
！

MUST