Matsusada HARS Series, Инструкция по эксплуатации

Страница: 68 / 92

7 Operating with Digital Control
58
HARS series
MEASure[:SCALar]:VOLTage[:DC]?
Gets the output voltage value.
Range 0 to (Rated voltage value x 110%)
Unit
“V“
Format MEAS:VOLT?
Query Returns the output voltage value in actual value.
MEASure[:SCALar]:CURRent[:DC]?
Gets the output current value.
Range 0 to (Rated value current
ｘ
110%)
Unit
“A”
Format MEAS:CURR?
Query Returns the output current value in actual value.
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude] <n | MINimum | MAXimum>
Sets the output voltage value.
Range 0 to Rated voltage value
Unit
“kV“, “V“, “mV“
Format
example
VOLT 23.45
Initial value VOLT 0.0
Query In response to "VOLT?", it returns the set voltage value in actual value.
Remarks
Regarding the range, refer to [7-5 Range for Voltage Setting, Current Setting, and
Power Setting].
[SOURce:]VOLTage:PROTection[:LEVel] <n | MINimum | MAXimum>
Sets the overvoltage protection value.
Range 0 to Rated voltage value x 110%
Unit
“
kV,
“
V
“
,
“
mV
“
Format
example
VOLT:PROT 23.45
Initial value VOLT:PROT MAX
Query
In response to "VOLT:PROT?", it returns the set overvoltage protection value in actual
value.
Remarks Regarding the range, refer to [7-9 Range for Voltage Setting and Current Setting].
[SOURce:]VOLTage:LIMit[:UPPer][:IMMediate][:AMPLitude] <n | MINimum | MAXimum>
Sets the voltage upper limit value.
Range 0 to Rated voltage value
Unit
“kV“, “V“, “mV“
Format
example
VOLT:
LIM
23.45
Initial value VOLT:LIM MAX
Query In response to VOLT:LIM?, it returns the set voltage upper limit in actual value.
Remarks Regarding the range, refer to [7-9 Range for Voltage Setting and Current Setting].