Matsusada HARS Series, Инструкция по эксплуатации

Страница: 13 / 92

2 Before Using This Product
3
HARS series
2 Before Using This Product
2-1 General Information
After unpacking the product and checking the power supply, make sure all of the following accessories are
included.
[Accessories]
□
Instruction Manual 1
□
Cover for analog remote connector 1
□
Output cable 1
□
AC input cable 1
□
AC input terminal cover (for 2kW and 3kW) 1
□
RS-485 Connector (-LRs option) 1
□
CO-OPT cable (with -LGob option) 1
□
Rubber feet 6
2-2 Initial Inspection
Before operating the product, thoroughly check the unit for abnormalities.
(Do not yet connect the power cable, or any other cables.)
1. Check the front panel, rear panel, top, and the chassis for dents, etc.
2. If an abnormality is found, contact both Matsusada Precision and the delivery company.
2-3 Method of Transport
This product should be carried by at least two people.
Hold it by the bottoms of the front panel and rear panel.
When placing the product onto a surface, be sure to avoid pinching your fingers underneath the unit.
Avoid placing a load on the handle on the front panel.
Otherwise, the product could be damaged and injury could occur.
or