Matrox Iris GT MIL, Инструкция по установке и техническое руководство, Страница: 47 / 256

Changing the IP address of your Matrox Iris GT 47
2. Enter the MAC address of your Matrox Iris GT in the MAC Address text box.
Note that the MAC address is written on a sticker attached to your Matrox Iris GT.
3. Click on the Load button.
If Matrox IrisBootParams has difficulty locating your Matrox Iris GT, a timeout
error is displayed. Verify that the MAC address is entered correctly. If the problem
persists, verify that your firewall settings or network router settings are not
blocking communications.
The network settings currently in use are displayed on-screen. Write them down
for future reference.
4. If the DHCP option is selected, deselect it.
5. Enter the static IP address established for your Matrox Iris GT in the previous
section, in the Static IP address text box. Recall that this IP address must be on
the same subnet as your computer and cannot be the same as the IP address of
your computer.
6. Enter the subnet mask of your computer in the Subnet text box. Note that the
subnet mask of your Matrox Iris GT must be identical to the one used by your
computer.
7. Click on the Save button.
8. Close the Matrox IrisBootParams utility.
9. Disconnect and then reconnect the power supply to your Matrox Iris GT and wait.
The Power LED and User LED of your Matrox Iris GT should both turn green
at the end of the boot process. This indicates that your Matrox Iris GT is now
ready to be used.