Matrox Iris GT MIL, Инструкция по установке и техническое руководство, Страница: 230 / 256

230 Appendix I: Matrox Iris portal website details
• Outgoing mail client settings . Sets the simple mail transfer protocol (SMTP)
server domain name used to send email and network messages between your
Matrox Iris GT and the rest of your network. It also provides a way to test these
settings, once enabled.
Remote view settings page
The Remote view settings page is used to define the basic information required
to create the View utility.
Field name Description
SMTP server domain name Specifies the name of your local SMTP server used to send emails.
Button name Description
Change mail client settings Accepts changes made for the SMTP server.
Link name Description
Test eMail and network message Loads the Net Send and mail validation page.
Field name Description
Maximum number of simultaneous clients Specifies the maximum number of computers that can connect to the View utility at
the same time.
RemoteView CAB base name Specifies the name of the cabinet (CAB) file referenced when installing the
RemoteViewActiveX control.
Remote CAB VROOT folder location Specifies the name of the folder used as the virtual root base of your Matrox Iris GT.
This virtual root bases is used by ASP pages to create RemoteViewActiveX
instances.
RemoteView image update using 2D modified regions Specifies whether to send only the modified regions of interest of an image or the
entire image when the remote view update process occurs.
RemoteAgent histogram tracing Specifies that a histogram should be produced when using the RemoteAgent
MFOCUS view display.
RemoteAgent focus indicator Enables the RemoteAgent MFOCUS indicator on the View utility page. To set the
focus ring of your Matrox Iris GT to its optimal position, maximize the indicator value
while adjusting the focus ring of your Matrox Iris GT.
Note that the focus indicator is only available when either a temporary license is
active or the Image Analysis package license enabled.