Matrox Iris GT MIL, Инструкция по установке и техническое руководство, Страница: 189 / 256

Utilities installed on your Matrox Iris GT 189
Example
The following example will read the boot settings, found in the file myparam.bpa,
and write them to the boot settings sector on your Matrox Iris GT.
Errors
• Bad type of parameter specified . An illegal command was used. Use only the
commands: READ , READF , and SAVE.
• Parameters restored with errors . The file used for input might be corrupt.
ProcMon utility
The ProcMon utility allows you to inquire about all running applications on your
Matrox Iris GT. It lists the threads and modules of each process, as well as the
CPU load of each thread. It can also be used to kill a process.
Syntax
Parameters
• Action . Specifies the action that the utility should perform. This parameter can
be set to one of the following values:
- lproc . Lists all processes.
- lthread . Lists all threads in all processes or in one specified process. To specify
the process, use the procid parameter.
- lmod . Lists all modules in all processes or in one specified process. To specify
the process, use the procid parameter.
- lload . Lists the load in all the processes or one specified process. To specify the
process, use the procid parameter.
- kproc . Kills one specified process. You must use the procid parameter to specify
the process to be killed.
ParamSave READF \UserDisk\myparam.BPA BOOT
\>ProcMon [Action] [procid] [procarg] [-l]