Matrox Iris GT MIL, Инструкция по установке и техническое руководство, Страница: 175 / 256

Utilities integrated in the operating system of your Matrox Iris GT 175
Parameters
If you enter the command and all its parameters at the command line, you must
enclose any string containing spaces in quotations.
• DEFSET . Specifies to restore all the factory-configured settings of your Matrox
Iris GT (boot and registry) from the rescue files. If this option is not specified, the
current settings will not be overwritten.
❖
Note that, if the factory-configured settings of your Matrox Iris GT are restored,
and you are in Static IP mode, you will have to use IrisBootParams to connect
to your smart camera and reset the IP allocation mode back to Static IP. For
more information, refer to
Chapter 4: Configuring your Matrox Iris GT to work
with your computer directly .
This parameter has no effect if used with files generated from the Matrox
IrisBackup utility.
• QUIET . Specifies that the FullRescue utility will run without requiring a user’s
intervention.
• SharedFolder . Specifies the location that holds the rescue files, installed from the
Matrox Iris GT Utilities DVD. This location must be a network-shared folder
and be accessible by the user, specified by the UserName parameter of this utility.
The location must be entered in the following format:
The FullRescue utility automatically creates a temporary LAN connection to the
specified folder. For more information on connections, see the
LAN Connections
page, which can be accessed from the Administration utility page of the Matrox
Iris portal website.
❖
Note that the name of the network-shared folder (for example, \\server\share ) only
requires a colon (:) when the files are stored in a subfolder of the network-shared
folder.
• UserName . Specifies the user name required to access the specified network-shared
folder. If your computer is on a domain, enter the domain name. For example:
\\server\share:subfolderpath
Domain\UserName