Matrox Iris GT MIL, Инструкция по установке и техническое руководство, Страница: 219 / 256

Administration utility page 219
Default gateway under static IP mode Specifies the IP address of the network device that can forward packets from your subnet to
others on the LAN, as needed. Note that if DHCP is enabled, this field is not used.
Network domain under static IP mode Specifies the network domain used by your Matrox Iris GT when using a static IP address.
Note that if DHCP is enabled, this field is not used.
Enable usage of AutoIP Specifies that the DHCP client of your Matrox Iris GT will assign an IP address automatically
when no DHCP server responds. Note that, if this value is disabled, your Matrox Iris GT will
not get an IP address automatically.
DHCP autoconfig check interval Specifies the set amount of time after which your Matrox Iris GT will test the network to see if
DHCP is now available, in secs. The default value is 385 secs.
Last known AutoIP address used Specifies the last known IP address used by AutoIP. Note that, if the IP address has recently
changed, you must refresh this page to see the change.
Default subnet mask for AutoIP Specifies the last known subnet mask used by AutoIP. Note that, if the IP address has recently
changed, you must refresh this page to see the change. The default is 255.255.0.0.
Default subnet for AutoIP Specifies the range of IP addresses in which AutoIP will generate your IP address. The default
value is 169.254.0.0. Note that this will change if AutoIP is enabled.
Speed and mode selection Specifies the speed and connection mode for your network connection. The connection speed
is in Mbits/sec. The connection mode can be either half or full duplex.
• Autodetect . Sets that your Matrox Iris GT will determine the speed and duplex of the
connection, and set it accordingly.
• 10 Mbits half duplex . Sets the connection to 10 Mbits per second at half duplex.
• 100 Mbits half duplex . Sets the connection to 100 Mbits per second at half duplex.
• 10 Mbits full duplex . Sets the connection to 10 Mbits per second at full duplex.
• 100 Mbits full duplex . Sets the connection to 100 Mbits per second at full duplex.
• 1000 Mbits full duplex . Sets the connection to 1000 Mbits per second at full duplex.
Field name Description
Button name Description
Update TCP/IP settings Enables changes made on the TCP/IP settings page. Note that you must reboot the operating system for changes
to take effect.