Matrox Iris GT MIL, Инструкция по установке и техническое руководство, Страница: 19 / 256

Installing MIL 19
Installing MIL
This section list the minimum requirements for your computer so that you can
use your Matrox Iris GT with MIL, and access the Matrox Iris portal website. For
specific details on how to install MIL, and other required software, refer to
Chapter 6: Installing application development software .
Minimum requirements to use Matrox Iris GT
The following lists the minimum requirements for your computer so that you can
use your Matrox Iris GT smart camera:
• A 100/1000 Mbits (sometimes referred to as 100/1 Gbit) Ethernet board with an
RJ45 connector, installed and functioning Ethernet drivers, and a configured
TCP/IP communication network protocol.
• Matrox Iris GT Ethernet M12 8-pin to RJ-45 cable.
• Matrox Iris GT Digital I/O and power cable, plus a power supply.
• An optional VGA/USB cable.
• Microsoft Internet Explorer version 7.0, or higher.
Minimum requirements to install the Matrox Iris GT utilities
The following lists the minimum requirements for your computer so that you can
install the Matrox Iris GT utilities.
• Microsoft Windows XP with SP2, or Microsoft Windows Vista with SP1 (32-bit
version only).
• A DVD reader.
• Up to 200 Mbytes of free hard disk space
• Microsoft Internet Explorer version 7.0, or higher.
• Microsoft Visual Studio 2005 SP1 or Microsoft Visual Studio 2008.
• A suitable display board that is compatible with DirectX 9 (Pixel Shader 1.4 or
higher) is recommended.