Master Forge 0098162, Руководство пользователя

Страница: 16 / 114

16
NATURAL GAS CONVERSION
18. Remove the 5 main burner control knobs
by grasping and pulling out. Do not remove
the control knob for the rotisserie burner.
Insert the supplied slotted screwdriver (JJ)
into the hole of each main burner control
valve stem as shown. Rotate the stem
counterclockwise (to the left) as far as it will
go until it stops. The stem will now be set in
the NG position.
Reattach the control knobs.
Hardware Used
19. Use the 17 x 19 mm wrench (GG) to
remove the LP hose and regulator from
the manifold. Attach the Natural Gas
Hose (sold separately) and tighten it with
the wrench.
Hardware Used
x 1
x 1
LP hose & Regulator
Slotted
screwdriver
JJ
18.1
19
17 x 19 mm Wrench
GG
10 ft. Natural Gas Hose
(Sold separately)
10 ft. Natural Gas Hose
18.2
x 1