Masimo Root Скачать руководство пользователя страница 84

Страница: 84 / 152

Root

Chapter 4: Temperature Measurement

www.masimo.com

Masimo

Temperature Probes

Two types of probes are available for use with the Root: an oral/axillary probe and a rectal

probe.
Root will automatically detect the probe type when connected: oral/axillary or rectal.

•

Adult axillary Spot Check Mode (predictive) temperatures are measured using the

oral/axillary probe in combination with the Root in Adult axillary mode. A

temperature reading is provided in approximately 12-15 seconds.

•

Pediatric axillary Spot Check Mode (predictive) temperatures are measured using

oral/axillary probes in combination with the Root in Pediatric axillary mode. A

temperature reading is provided in approximately 10-13 seconds.

•

For oral temperatures, place the probe tip under the patient's tongue on

either side of the mouth to reach the sublingual pocket and ask the patient

to close his/her lips.

Sublingual Pocket Location

Содержание Root

























































































































































Результаты поиска

Содержание Root

Отзывы:

Masimo Root, Руководство оператора, Страница: 84 / 152

Результаты поиска

Содержание Root

Отзывы: