Masimo Root Скачать руководство пользователя страница 79

Страница: 79 / 152

Root

Chapter 3: Operation

www.masimo.com

Masimo

Radical-7 and Radius-7 Charging Indicator

When Root is connected to an AC power source, it is able to charge a correctly docked

Radical-7 or Radius-7. This is true whether the device is powered on, in Sleep Mode, or

powered off. Conversely, when Root is not connected to AC power, it will not charge the

device.
The light status provides a visual indication of the battery condition:

Light Status Battery Indication

Green

Battery is fully charged.

Orange

Battery is charging.

Red

Battery is unable to charge.

Off

Battery is fully charged, not being charged.

Sleep and Power Off

To put Root in the Sleep Mode or Power Off Mode, follow these steps:

State

Description

Sleep

Mode

Press and hold the Power Button for two (2) seconds until one (1) audible tone

sounds.
Sleep Mode conserves power while enabling a quicker startup sequence.

Power Off

Mode

Press and hold the Power Button for eight (8) seconds, until two (2) audible

tones sound. The Home Button will flash, and the Power Button will flash orange.
Power Off Mode completely shuts down Root and results in a longer startup

sequence.

Содержание Root

























































































































































Результаты поиска

Содержание Root

Отзывы:

Masimo Root, Руководство оператора, Страница: 79 / 152

Результаты поиска

Содержание Root

Отзывы: