Masimo Root Скачать руководство пользователя страница 73

Страница: 73 / 152

Root

Chapter 3: Operation

www.masimo.com

Masimo

Audio Pause

Audio Pause temporarily suspends all audible alarms on Root. When it is active, visual alarms

are not impacted and will still display. The Audio Pause icon is located on the left side of the

Status Bar – do not confuse with the Sounds icon on the right side of the Status Bar. See

About the Status Bar

on page 29.

By default, Audio Pause is inactive, and the icon appears in the following way:

Audio Pause inactive

To activate Audio Pause, press the icon. It will turn red and the remaining Audio Pause

Duration time counts down next to the icon. The default duration for Audio Pause is 120

seconds. In the example below, Audio Pause is activated, and there are 15 seconds left until

Audio Pause is inactive again.
To configure Audio Pause, see

Sounds

on page 56.

Audio Pause active. 15 seconds until Audio Pause is inactive.

Note:

When Audio Pause is activated, powering off and then powering on Root will return

Audio Pause to its default inactive state.

Содержание Root

























































































































































Результаты поиска

Содержание Root

Отзывы:

Masimo Root, Руководство оператора, Страница: 73 / 152

Результаты поиска

Содержание Root

Отзывы: