Masimo Root, Руководство оператора, Страница: 113 / 152

www.masimo.com 111 Masimo
Chapter 10: Messages
The following messages are specific to Root:
Message Explanation Next Step
Battery Charge is
Low.
The internal battery needs to
be charged. System Status
Lights flash yellow.
Charge Root's battery using AC power.
MOC-9 module
Disconnected
(e.g. SedLine
Disconnected)
A MOC-9 module is
disconnected from Root.
Reconnect module or acknowledge
message by pressing the Alarm Silence
icon.
Radical-7
Disconnected
Radical-7 is disconnected
from Root.
Reconnect Radical-7 or acknowledge
message by pressing the Alarm Silence
icon.
Radius-7
Disconnected
Radius-7 is disconnected from
Root.
Reconnect Radius-7 or acknowledge
message by pressing the Alarm Silence
icon.
Check Probe Probe is not responsive.
Check probe tip condition. Re-insert
probe into probe well or check for
alignment problem. If problem persists,
replace the probe. If problem still
persists, contact Customer Service.
Retake
Measurement
An error has occurred in the
process of taking a patient
temperature measurement.
Try another measurement cycle. If
problem persists, replace probe.
Check Ambient
Temperature
Ambient temperature may be
too high or too low.
Verify ambient temperature does not
exceed operating specification.
Check internal temperature at probe
well.
Replace Probe
Probe is not responsive due to
not being calibrated or
damaged.
Replace probe.
Temperature Out
of Range
Patient or environmental
temperature conditions may
be too low for a temperature
measurement.
Verify patient temperature is not outside
of the measurement range.
Verify ambient temperature does not
exceed operating specification.
If conditions are valid and problem