Maquet SERVO-i, Руководство пользователя

Страница: 99 / 156

49
Servo… User´s manual
English edition
Order No: 65 14 892 E313E
Infant Adult Universal Options
To set the amplitude for displayed
waveforms:
1. Press the fixed key
Quick access .
2. Press the Open Lung Tool scales
touchpad.
3. Press the touchpad corresponding to the
waveform whose scale you want to
adjust.
4. Turn the Main Rotary Dial to the desired
value.
Notes:
• When you reach a maximum allowed
value, its display will flash.
• The time parameter displayed in the
lower right corner of the user interface
screen indicates how long it will take at
the current settings for the waveform to
complete one left-to-right sweep across
the screen. Change the scaling with the
zoom in/out function to speed up or slow
down the screen-filling process.
• The breaths parameter displayed in the
lower right corner of the user interface
screen indicates the number of breaths at
the current respiratory rate required for
the waveform to fill the screen.
5.7 Saving Data
Waveforms and settings may be saved in the
following ways:
• A 20-second recording may be taken for
immediate on-screen analysis.
• Screen data or patient data may be
written to an optional Ventilation Record
Card for later analysis (file is readable by
Microsoft Excel).
5.7.1 Recording Waveforms
To save one recording of the current
waveform along with breathing parameter
values:
1. Press the fixed key
Save .
A total of 20 seconds of data will be
recorded—10 seconds before the Save key
was pressed and 10 seconds after the Save
key was pressed.
Note: If Save is pressed again, the previous
recording will be erased. Using Admit
patient also erases the previous recording.