V.033114
60
M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA
Tel: +630-858-6101 Fax: +630-858-6134
WARNING:
Before entering between print heads, always push in Emergency Stop button
and disconnect Cycle Interruption Cords. Refer to the beginning of this section for detailed
information.
Rear Micro
Register
Adjustment
The rear micro-register adjustment allows
movement of the screen frame from the left to the
right.
To adjust, loosen the knurled locking knob (1) at
the bottom of the adjustment to allow movement
of the screen frame.
Adjust the cross knob (2) at the right side of the
adjustment to make registration corrections.
After adjusting, lock the knurled knob (1).
WARNING:
Before entering between print heads, always push in Emergency Stop button
and disconnect Cycle Interruption Cords. Refer to the beginning of this section for detailed
information.
Front and Rear
Print Stroke
Length
Adjustment
To adjust the print stroke length, grasp the sensor
mounting bracket and slide the proximity sensor to
the required position.
Adjust the sensor so that the floodbar and
squeegee just clear the image area of the screen.
Note: Do not adjust the sensor while the Print Station is
in operation.
