M&R Challenger 2 Скачать руководство пользователя

Страница: 39 / 106

V.033114

M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA

Tel: +630-858-6101 Fax: +630-858-6134

www.mrprint.com

| store.mrprint.com

Front/Rear
Switches

The next row of switches is the

FRONT/REAR

switches. The

FRONT/REAR

switches are shown

in the

REAR

position on the

PANEL TEST

screen.

To test any of the switches place the switch in the

FRONT

position. The switch on the screen moves

to the

FRONT

position and the color changes to

red. If you place the switch in the

REAR

position

the switch on the screen moves to the

REAR

position and the color changes to gray.

If you place the switch in either

FRONT

REAR

position and the switch does not change positions
as described, then the switch must be considered
faulty and should be inspected or replaced.

Test Print On/Off
Switch (1)

The

TEST PRINT ON/OFF

switch is shown in the

OFF

position on the

PANEL TEST

screen. To test

the switch, place the switch in the

TEST PRINT

position. The switch on the screen moves to the

TEST PRINT ON

position. If you place the switch in

the

TEST PRINT OFF

position, the switch on the

screen moves to the

TEST PRINT OFF

position. If

you place the switch in either

TEST PRINT ON

TEST PRINT OFF

position and the switch does not

change position as described, then the switch must
be considered faulty and should be inspected or
replaced.

Print Start/Print
Finish Switch
(2)

The

PRINT

START/PRINT FINISH

switch is

shown in the middle or

OFF

position on the

PANEL TEST

screen. To test the switch, place the

switch in the

PRINT START

position. The switch

on the screen moves to the

PRINT START

position. If you place the switch in the

PRINT

FINISH

position, the switch on the screen moves

to the

PRINT FINISH

position. If you place the

switch in either

PRINT START

PRINT FINISH

position and the switch does not change position
on the screen, then the switch must be considered
faulty and should be inspected or replaced.

Automatic/
Manual Switch
(3)

The

AUTOMATIC/MANUAL

mode switch is

shown in the middle or

OFF

position on the

PANEL TEST

screen. To test the switch, place

the switch in the

AUTOMATIC

position. The

switch on the screen moves to the Automatic
position. If you place the switch in the

MANUA

position the switch on the screen moves to the

MANUAL

position. If you place the switch in either

AUTOMATIC

MANUAL

position and the switch

does not change position as described, then the
switch must be considered faulty and should be
inspected or replaced.

Содержание Challenger 2











































































































Результаты поиска

Содержание Challenger 2

Отзывы:

Похожие инструкции для Challenger 2

Бренды по названию

Популярные бренды

M&R Challenger 2, Руководство пользователя

Результаты поиска

Содержание Challenger 2

Отзывы:

Похожие инструкции для Challenger 2

Бренды по названию

Популярные бренды