V.033114
48
M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA
Tel: +630-858-6101 Fax: +630-858-6134
6.1.2
Revolver Sequencing Program Overview
Revolver
Sequencing
Program
U.S. Patent No.
5,595,113
Textile Screen Printers may have print
requirements beyond the capabilities of their
equipment. However, the flexibility and versatility
of the screen printing process allows
experimentation with such variables as color
sequence, ink deposit and flash cure utilization.
The M&R Revolver Sequencing Program was
designed to maximize the capabilities of your
equipment while minimizing production costs. The
M&R Revolver Sequencing Program expands the
print and flash capability of your press to allow
multiple flash cure cycles without losing any color
print capability.
To explain how the M&R Revolver can expand
your production capabilities, we offer the following
examples of typical production scenarios.
Note: When programming revolutions select to
On
only
the heads that you want to print or flash. When
you are finished programming all of the
revolutions, make sure all of the heads that you
are using are turned
On
.
Job 1
Revolutions 3
Flash in Head 2
Revolution No. 1
(P)
Head 1
(F)
Head 2
Revolution No. 2 (P)
Head 1
(F)
Head 2
(P)
Head 4
(P)
Head 5
Revolution No. 3 (F)
Head 2
(P)
Head 6
Step 1
Program print head number 2 to operate as the
flash cure station.
Place the
Front/Rear
switch (1) for that particular
print head on the main control panel in the
Front
position. The LED in the tip of the switch handle
will illuminate red. Press
Enter
(2) next to the
word
Flash
in the
Flashes
menu screen. The
indicator below the print head (3) on the screen
displays a letter
F
confirming that the print head
will now operate as a flash cure station.
