Mami Mini TRACER, Руководство пользователя

Страница: 11 / 19

0
0
1
1
C
C
? ? ? ? 0
0
1
1
0
0
#
#
#
*
(1 TO 9999)
(4TH DIGIT)
(FIRST DIGIT)
PROGRAM THE SUBSCRIBER ID
READ THE SUBSCRIBER ID
THE CURRENT SUBSCRIBER CODE WILL BE DISPLAYED ONE DIGIT AT THE TIME.
TO PROGRAM THE DIP-SWITCH CODES OF THE DETECTORS AND REMOTE
CONTROLS, ENTER THE INSTALLER CODE FOLLOWED BY THE "#" KEY.
SELECT THE CODE YOU WANT TO CHECK /CHANGE WITH"
1 ,A " or " " 1, B
T HE CURRENTLY STORED CODE WILL BE DISPLAYED.
USING ALL KEYS TOGGLE THE CORRESPONDING BIT/LED
TO OBTAIN THE WANTED CODE.
TO EXIT PRESS AND HOLD * AND # TOGETHER
= ON
= OFF
NOTE:
SUBSCRIBER I.D. SETTING ( TRANSMITTER /CSID CODE)
INSTALLER ( 2 ): PROGRAMMING (CONTINUED)
- 9 -
0
0
#
#
1
1
A
B
0
0
1
1
0
0
SET DETECTORS/SENSOR CODE
1
9
2 3 4 5 6
7
8
SET REMOTE CONTROL CODE
action:
INSTALLER CODE REG. NO.
FOR 16 BIT CODES (SMART) USE ALL KEYS
1
9
2
3
4 5 6
7 8
TO EXIT PRESS AND HOLD * AND # - THE DECIMAL VALUE OF THE CODE WILL BE SHOWN ON THE DISPLAY .
Note that code “C” cannot be entered manually but only through the self-learnig process
0 A B C D
*
#
0 A B C D
#
*
FACTORY DEFAULT
AFTER ENTERING THE 4TH DIGIT THE NEW CODE IS AUTOMATICALLY STORED IN MEMORY
This is the CUSTOMER i.d. NUMBER sent to the BASE STATION
SETTING / DISPLAYING DETECTOR/ REMOTE CONTROL CODES
1 2 3 4 5 6
ARM
WARN
PER
0 # 1 D 0 1 0
SELF LEARNING THE REMOTE CONTROL
AND DETECTORS CODES.
1- TRANSMIT CODE FROM SENSOR OR REMOTE CONTROL UNTIL CODE AND CHANNEL ARE MEMORIZED BY THE DISPLAY
3- TO STORE THE RECEIVED CODE AS REMOTE CONTROL CODE , PRESS “B” KEY ON THE KEYPAD
2- TO STORE THE RECEIVED CODE AS DETECTOR /SENSOR CODE, PRESS “A” KEY ON THE KEYPAD
4- TO STORE THE RECEIVED CODE AS THE RESPONSE CODE , PRESS “C” KEY ON THE KEYPAD
SELF LEARNING THE WIRELESS CODES
Enter the self learning mode by entering:
M000037