manualshive.com logo in svg

Malvern MPT-2, Руководство пользователя, Страница: 20 / 85

Поделиться
Скачать
Malvern MPT-2 Скачать руководство пользователя страница 20

Chapter 1

Introduction and hardware

Page 1-14

MAN 0318

 Stirrer connector 

Connection for the magnetic stirrer.

pH probe 

The pH probe connects to the rear panel of the titrator.

Features of the Vacuum degasser accessory

This section identifies the main features of the Vacuum degasser accessory.

Front Panel Connections

ill 8733

Titrant line ports

There are 3 degassing channels labelled A to C on the front of the degasser. Each 
channel consists of a pair of female connectors which provide the input and output 
ports for running the titrant lines through the vacuum degasser to the titrator.

Note

Flow direction is not critical.

Plugs are provided to seal the ports of any unused channels. This must be done to 
ensure the Degasser works correctly.

POWER

STATUS

VACUUM

LEDs

Titrant line
I/P / O/P ports

A

B

C

Front of
Vacuum
Degasser

MAN0318-4.0 -  MPT-2 Autotitrator-Degasser.book  Page 14  Tuesday, September 4, 2012  12:15 PM

Содержание MPT-2






















































































Отзывы:

Нет отзывов