![background image](http://html.mh-extra.com/html/makita/ebh341r/ebh341r_original-instruction-manual_223041004.webp)
4
Resting
•
Transport
•
Refueling
•
Maintenance
•
Tool replacement
•
Start the brush cutter only in accordance with the instructions.
Do not use any other methods for starting the engine!
Use the brush cutter and the tools supplied only for applications specified.
–
Start the brush cutter engine only after the entire tool has been assembled.
–
Operation of the tool is permitted only after all the appropriate accessories
are attached!
Before starting, make sure that the cutter blade will not contact any objects
–
such as branches, stones, etc.
The engine is to be stopped immediately if there are any engine problems.
–
Should the cutter blade hit stones or any other objects immediately stop the
–
engine and inspect the cutter blade.
Inspect the cutter blade at frequent regular intervals for damage (detect
–
hairline cracks by means of a tapping-noise test).
A familiar ringing sound should be heard.
–
Operate the brush cutter only with the shoulder strap attached. It should be
–
properly adjusted before putting the brush cutter into operation. It is essential
to adjust the shoulder strap to the user’s size to prevent fatigue occurring
during use or loss of control of the tool. Never hold the tool with one hand
during use.
During operation always hold the brush cutter with both hands.
–
Always ensure a safe, well-balanced footing.
Operate the brush cutter in such a manner as to avoid inhalation of the
–
exhaust gases. Never run the engine in enclosed rooms (risk of suffocation
and gas poisoning). Carbon monoxide is an odorless gas. Always ensure
there is adequate ventilation.
Stop the engine when resting and when leaving the brush cutter unattended.
–
Place it in a sale location to prevent danger to others, setting fire to
combustible materials, or damage to the machine.
Never lay down the hot brush cutter onto dry grass or onto any combustible
–
materials.
The cutter blade must be used with its appropriate guard. Never run the tool
–
without this guard!
All protective parts and guards supplied with the machine must be used
–
during operation.
Never operate the engine with a faulty exhaust muffler.
–
Stop the engine during transport.
–
When transporting the equipment, always attach the cover to the cutting
–
blade.
Put the brush cutter in upright position and fix it during care or truck
–
transportation to avoid damage.
When transporting the brush cutter, ensure that the fuel tank is completely
–
empty, to avoid fuel leakage.
If the equipment gets heavy impact or fall, check the condition before
–
continuing work. Check the fuel system for fuel leakage and the controls
and safety devices for malfunction. If there is any damage or doubt, ask our
authorized service center for the inspection and repair.
Refueling
To reduce the risk of fire and bum injury, handle fuel with care it is highly
–
flammable, Stop the engine during refuelling, keep well away from open
flame and do not smoke.
Avoid skin contact with petroleum products. Do not inhale fuel vapor. Always
–
wear protective gloves during refuelling. Change and clean protective clothing
at regular intervals.
Take care not to spill either fuel or oil. Always wipe unit dry before starting
–
engine. Allow wet cloths to dry before disposing in proper, covered container
to prevent spontaneous combustion.
Avoid any fuel contact with your clothing. Change your clothing immediately if
–
fuel has spilled on it (danger hazard).
Inspect the fuel cap at regular intervals making sure that stays securely
–
fastened.
Carefully tighten the locking screw of the fuel tank. Change locations to start
–
the engine (at least 10ft. or 3 meters away from the place of refueling).
Never refuel in closed rooms. Fuel vapors accumulate at ground level (risk of
–
explosions).
Only transport and store fuel in approved containers. Make sure stored fuel is
–
not accessible to children.
Do not attempt to refuel a hot or a running engine.
–
When mixing gasoline with two-stroke engine oil, use only gasoline which
–
contains no ethanol or methanol (types of alcohol). This will help to prevent
damage to fuel lines and other engine parts.
Содержание EBH341R
Страница 149: ...149 ...
Страница 150: ...150 ...
Страница 151: ...151 ...
Страница 152: ...Makita Corporation Anjo Aichi Japan 885161A930 www makita com ALA ...