Maintenance Manual
MAN-00
167
XYLO
mHawk
February 2012/ Rev1
The repair methods given by the manufacturer in this document are based on the technical specifications
,
current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of
or
whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra
Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution
© 2012 Mahindra & Mahindra Ltd.
Exterior Lamps –
Lighting Control Stalk
The lighting control stalk controls operations of
parking lamps, head lamps, head lamp beam
selection, high beam flashing and turn signals
when the ignition switch is ON.
Push the lighting control stalk backward
direction to indicate a right turn; and push the
stalk to forward direction to stop the position
B; again push it further forward direction to
indicate a left turn. The instrument cluster
arrow lamp pointing towards the right flashes.
If the turn signal lamps on the instrument panel flash faster than normal, there may be a possibility
that one or more of the turn signal lamp bulbs have blown. Replace the blown bulb immediately.
Rotate the outer rotary switch on the lighting
control stalk aligning the “dot” on the switch to
“OFF” on the stalk to switch OFF all lamps.
Parking Lamp ON
Rotate the outer rotary switch on the lighting
control stalk aligning the “dot” on the switch to
the “1st detente” position on the stalk to
switch ON the parking lamps.
The tail lamp, license plate lamp, side marker lamps, instrument panel illumination lamps and all
interior switches are also activated when the Parking lamp is switched ON.
Page 50