Maintenance Manual
MAN-00
167
XYLO
mHawk
February 2012/ Rev1
The repair methods given by the manufacturer in this document are based on the technical specifications
,
current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of
or
whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra
Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution
© 2012 Mahindra & Mahindra Ltd.
712-MAT-0011 : 0.60 hrs.
COOLANT – REPLACE
Coolant – MAXIMILE ULTRA COOL (Pre-mixed)
Capacity – @ 08 Lit.
COOLANT – REPLACE
Refer illustration shown A & B.
1.
Open the degassing tank cap
2.
Place coolant collection tray below and remove the drain plug on the Radiator bottom
[A]
and Engine block
[B]
3.
Let coolant get complete drain in coolant drain tray.
4.
Refit the drain plugs & fill new coolant in degassing tank.
5.
Check all the coolant hoses & clips for proper fitting and no leakage; correct if required.
6.
Start the engine and run at approx.
1200 rpm for 2-3 min.
7.
Check coolant level in degassing tank and add coolant as per requirement.
8.
Fill coolant in the degassing tank up to MAX level.
9.
Refit the degassing tank cap.
10.
Start the engine again and run at approx.
1200 rpm for 2-3 min.
11.
Check coolant level in degassing tank and top-up as required.
Never remove the degassing cap when the engine is hot.
Never mix MAXIMILE coolant with water. Maximile coolant is premixed/ ready to use.
Recommended to change the coolant at 60000kms, 140000kms and then every 80000kms.
Use
Maximile ULTRA COOL
Don’t use other brand coolants for top up.
B
A
Page 18
