Maintenance Manual
MAN-00
167
XYLO
mHawk
February 2012/ Rev1
The repair methods given by the manufacturer in this document are based on the technical specifications
,
current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of
or
whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra
Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution
© 2012 Mahindra & Mahindra Ltd.
CLUTCH FLUID REPLACEMENT / CLUTCH BLEEDING
1.
Remove the dust cap of the bleeder screw.
2.
Connect bleeding tube, to bleeding screw
on slave cylinder.
-
Ensure that the other end of the tube is
fully immersed in the bottle having clean
clutch /brake fluid.
3.
Fill the Reservoir up to the top level with recommended fluid.
4.
Operate clutch pedal
3 or 4
times slowly to the full stroke. Holding the clutch in depressed
condition loosen the bleeding screw on slave cylinder by ½ to ¾ turn and allow all the air escape
in to the container bottle.
5.
Repeat the exercise till no air bubble appears in the bottle.
6.
During this operation ensure fluid level in reservoir.
7.
Tighten the bleed screw properly.
8.
Remove bleeding tube and place the dust cap on bleed screw.
9.
Check the fluid level in container and top up it to the ‘max’ level.
Clutch
Housing
Slave Cylinder
Hose from Clutch
Master Cylinder
Bleeder on Concentric
Slave Cylinder
Bleeder Screw
on Concentric
Slave Cylinder
Concentric Slave
Cylinder mounting
bolts – 3 nos.
Slave Cylinder
Connector
Page 30