Maintenance Manual
MAN-00
167
XYLO
mHawk
February 2012/ Rev1
The repair methods given by the manufacturer in this document are based on the technical specifications
,
current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of
or
whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra
Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution
© 2012 Mahindra & Mahindra Ltd.
LH side head lamp (assembled condition) – Rear View
Rotation of the Screw driver –
Down/ Clockwise (Loose)
Up/ anti-clockwise (Tight)
LH side head lamp (assembled condition) – Top View
Check the horizontal setting of RH & LH head
lamp. Refer above illustration for low beam cut
off pattern and horizontal dimensions.
Use 250mm size star screw driver and set screw
[B]
to adjust low beam horizontal movement.
Refer above illustration for low beam cut off
pattern.
Horizontal movement Setting screw
[B]
can be accessed from Headlamp top side when it is assembled on
vehicle.
LH side head lamp Assembly – Rear View
Rotation of the Screw driver –
Down/ Clockwise (Right side movement)
Up/ anti-clockwise (Left side movement)
B
B
A
Page 57