Maintenance Manual
MAN-00
167
XYLO
mHawk
February 2012/ Rev1
The repair methods given by the manufacturer in this document are based on the technical specifications
,
current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of
or
whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra
Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution
© 2012 Mahindra & Mahindra Ltd.
712-MAT-0013 : 0.50 hrs.
FUEL FILTER – REPLACE
Engine Compartment
•
Remove the ‘Water in Fuel Sensor’
connector
and
remove the sensor by rotating it in anti-
clockwise direction.
NOTE:
Water in Fuel Sensor is fitted at the bottom
of the Fuel Filter element and it can be accessed
from front right side wheel housing.
•
Remove the Fuel Filter Element
[1]
•
Fit a new fuel filter element and tighten it by
hand
[4]
•
Refit the “Water in fuel” sensor
[3]
•
Remove the fuel tank cap
•
Switch the Ignition to ‘ON’ position
•
Bleed the system using hand primer and bleed
screw on the banjo.
•
Bleed the fuel system by operating the priming pump several times until you feel more
resistance. The engine may take longer to start
[B]
.
Always replace with genuine fuel filter assembly.
Fuel Filter Location in Xylo mHawk
WATER SEDIMENT DRAIN
PLUG IN FUEL FILTER
Page 20