Maintenance Manual
MAN-00
167
XYLO
mHawk
February 2012/ Rev1
The repair methods given by the manufacturer in this document are based on the technical specifications
,
current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of
or
whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra
Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution
© 2012 Mahindra & Mahindra Ltd.
712-MAT-0003 : 0.20 hrs.
ENGINE OIL FILTER– REPLACE
Never use a wrench/spanner to tighten the oil filter.
Oil filters need to be replaced during engine Oil change. Recommended replacement intervals are
at 5000, 20000kms & then at every 20000kms. Use
Maximile Universe
oil filter.
Oil filter Removal –
Refer illustrations.
1.
Remove the oil filter by unscrewing it in anti-clockwise direction, using an oil filter wrench.
2.
Check the oil cooler stud for tightness – Torque
27.5 ± 2.5 Nm
.
3.
Smear a layer of fresh engine oil on the oil filter “O” ring
4.
Fit the oil filter and turn it clockwise till the “O” ring touches the oil cooler face.
5.
Turn the filter another
3/4th turn by hand
.
6.
Check for Oil leakage/ seepage at –
Refer illustration
[A]
checkpoints are shown with arrows.
Oil pan & crankcase joint
Oil pan Drain Plug.
Oil filter joint.
Oil cooler joint
Oil Filter & Cooler disassembly
B
Oil Leak - Check Points near Oil Filter
A
Page 10