Maintenance Manual
MAN-00
167
XYLO
mHawk
February 2012/ Rev1
The repair methods given by the manufacturer in this document are based on the technical specifications
,
current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of
or
whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra
Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution
© 2012 Mahindra & Mahindra Ltd.
712-MAT-0007 : 0.50 hrs.
ACCESSORY DRIVE BELT – INSPECT (AC-Water pump and Alternator-Steering Pump drive belt)
ACCESSORY DRIVE BELT - LAYOUT
ACCESSORY DRIVE BELT TO BE CHECK FOR –
Refer illustrations below.
1.
Abrasion
2.
Cracking
3.
Improper Install
4.
Uneven Rib Wear
5.
Misalignment
6.
Chunk-out
7.
Gravel penetration
8.
Pilling
NOTE: It is recommended to remove & check the
drive belts thoroughly if any abnormality noticed.
1.
Abrasion
– Each side of belt appears shiny or
glazed. In advanced stages, fabric becomes
exposed.
2.
Cracking
– Small, yet visible cracks along the
length of a rib or ribs.
3.
Improper Install
– A belt rib begins separating
from the joined strands. If left unattended, the
cover will often separate, causing the belt to
loosen.
4.
Uneven Rib Wear
– Belt shows damage to the
side with the possibility of breaks in the tensile
cord or rough edged ribs. A thumping noise may
also be heard when running.
Page 13