Mahindra MAN-00167 страница 4 Скачать руководство пользователя

Страница: 4 / 79

2012 Mahindra & Mahindra Ltd

part, without the written permission of Mahindra & Mahindra Ltd.

•

Legend of the Safety Symbols

To emphasize information and procedures regarding safety, use, maintenance, etc., the
following symbols are used throughout the manual.

Term/ Symbol

Denotation

DANGER

indicates

imminently

hazardous situation which, if not avoided,
will result in death or serious injury.

WARNING

indicates

potentially

hazardous situation which, if not avoided,
could result in death or serious injury.

CAUTION

indicates a

potentially

hazardous situation which, if not avoided,
may result in minor or moderate injury.

CAUTION used without the safety alert
symbol indicates a potentially hazardous
situation which, if not avoided, may result in
property damage.

Indicates important information relevant to
the vehicle, the vehicle's use or to sections
of this manual to which particular attention
must be paid for optimum use of the
vehicle.

If you see this symbol, it indicates “no”,

“do not,” “do not do this,” or “never”.

•

Legend of the Procedure/ Action Symbols

To emphasize illustrations and standard operation procedures, the following symbols are used
throughout the manual.

Symbol

Denotation

Set / Place / Check here

Locate / Show

Move forward / Fit

Rotate / Turn Clockwise

Rotate / Turn anti-clockwise

Содержание MAN-00167
















































































Результаты поиска

Содержание MAN-00167

Отзывы:

Похожие инструкции для MAN-00167

Бренды по названию

Популярные бренды

Mahindra MAN-00167, Руководство по обслуживанию

Результаты поиска

Содержание MAN-00167

Отзывы:

Похожие инструкции для MAN-00167

Бренды по названию

Популярные бренды