Magtek DynaPro Go, Инструкция по установке и эксплуатации

Страница: 22 / 60

5 - Configuration
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Installation and Operation Manual
Page 22 of 60 ( D998200129-10 )
5 Configuration
The device has many commands the host software can use to change and monitor its behavior. They are
documented in detail in
D998200136 DYNAPRO GO PROGRAMMER'S REFERENCE MANUAL
(COMMANDS)
. In addition, operators can view or change some configuration options using the keypad
and display. Table 5-1 provides details for using these features.
Table 5-1 - Keypad Configuration Features
Configuration Option Key Sequence Notes
Open Host Connection
Left Function Key
1 2 3
Right Function Key
When the device is not always listening for
incoming connections, this key sequence opens an
unsecured TCP/IP connection to the host and
requests the host initiate a secured connection.
Change Active
Connection
Left Function Key
4 5 6
Right Function Key
Toggles the device’s active connection between
possible connection types.
LCD backlight mode
Left Function Key
5 2 2
Right Function Key
Changes the mode of the LCD display backlight
between
Auto
and
Manual
. See section 5.1 How
to Configure the LCD Display Brightness .
LCD backlight
brightness
Left Function Key
5 2 3
Right Function Key
Available if the host software has not configured
the device to use AUTO LCD brightness based on
the light sensor. See section 5.1 How to
Configure the LCD Display Brightness .
Keypad backlight mode
Left Function Key
5 3 3
Right Function Key
Changes the mode of the keypad backlight
between
Auto
and
Default
. See section
5.2 How
to Configure the Keypad Backlight .
Show device details
Left Function Key
7 8 2
Right Function Key
Displays a page showing information about the
device. See section 6.2.2 Device Details Screens .
Show additional device
details
Left Function Key
7 8 1
Right Function Key
Displays a page showing information about the
device. See section 6.2.2 Device Details Screens .
Show EMV device
details
Left Function Key
7 8 3
Right Function Key
Displays a page showing information about the
device. See section 6.2.2 Device Details Screens .
Show wireless status
Left Function Key
6 2 2
Right Function Key
Displays a page showing information about the
device’s 802.11 wireless connection. See section
6.2.4 Wireless Status Screen .