4 - Installation
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Installation and Operation Manual
Page 19 of 60 (
D998200129-10
)
4
Installation
Installing DynaPro Go is straightforward: The acquirer configures the Certificate Authority, public keys,
terminal and payment brand settings before deployment; end users need only set up a host with
appropriate software, configure the software, and connect the device to the host. This section provides
general information about solutions that incorporate DynaPro Go, including host software, connecting the
device, and charging the device.
4.1
About Inspection
It is important to regularly and thoroughly inspect a device in live usage, and its immediate surroundings,
to make sure malicious individuals have not tampered with it. MagTek recommends inspection training
for all device operators, and an inspection schedule with checkpoints in place to make sure inspections are
being done as specified and as scheduled. MagTek provides an easy-to-follow guide for inspecting the
device in
D998200133 DYNAPRO GO DEVICE INSPECTION
.
Before the device is deployed, it is also important to inspect the packaging to make sure it has not been
tampered with in storage or in transit. MagTek provides details for inspecting the integrity of the device’s
packaging in
D998200134 DYNAPRO GO PACKAGE INSPECTION
.
