6 - Operation
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Installation and Operation Manual
Page 55 of 60 (
D998200129-10
)
6.9
How to Enter Passcodes
Some device operations require the operator to enter a passcode before the operation can proceed. In
these cases, the device’s display will prompt the user to
Enter Admin Passcode
. The operator should
enter the passcode (the factory default is
8765432
) and press
Enter
. The device shows asterisks
masking the passcode the operator is entering. If the operator makes a mistake, the
Clear
button clears
the passcode field so the operator can start over, and the
Cancel
button cancels the operation that
required the passcode.
Figure 6-24 - Passcode Prompt Screens
