5 - Configuration
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Installation and Operation Manual
Page 23 of 60 (
D998200129-10
)
5.1
How to Configure the LCD Display Brightness
The device’s LCD display has a backlight that can be configured to either remain at a constant user-
selected brightness level (
Manual mode
) or adapt its brightness to ambient lighting based on the device’s
light sensor (
Auto mode
). The factory default of the device is
Manual
mode at
75%
brightness.
To change the LCD display backlight mode, press
Left Function Key
5
2
2
Right Function Key
to
open the
LCD Brightness Config
screen.
The
LCD Brightness Config
screen shows the mode the LCD display backlight is currently using. To
change the mode, press the function key below the selection you want, then press the
Enter
key to save
the change. To exit without saving changes, press the
Cancel
key or wait 10 seconds for the device to
return to the
Welcome
screen.
