5 - Configuration
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Installation and Operation Manual
Page 31 of 60 (
D998200129-10
)
11)
When the device screen prompts
Enter Admin Passcode
, enter the device admin passcode on the
device keypad. The default is
8
7
6
5
4
3
2
Enter
.
12)
In the
Access Point
group, select the
Security
algorithm of the wireless access point the device
should connect to. For this device, the access point must use is
WPA2
. Leave the access point
Type
set to
Personal
.
13)
Enter the Service Set ID (
SSID
) of the wireless access point you are connecting to.
14)
Enter the
Password/Key
for the wireless access point.
15)
Press the
Set
button.
